Water Filter Profine Ocra Medium
Code: Y21414BRelated products
Product detailed description
Disposable PROFINE® OCRA Cartridge for Water Softening
The single-use PROFINE® OCRA cartridge softens water (removes total hardness) with strong cationic gel resin, leaving a residual hardness of approximately 25%.
Easy installation without special tools required.
Lifespan: Based on model, see table below.
| SMALL | MEDIUM | LARGE | |
|---|---|---|---|
| Flow Rate | 1.5 l/min * | 2 l/min * | 2.5 l/min * |
| Capacity | 670 l * | 1,100 l * | 1,600 l * |
| Operating Pressure | Min. 2 – Max. 6 Bar | Min. 2 – Max. 6 Bar | Min. 2 – Max. 6 Bar |
| Temperature | Min. 4 – Max. 30°C | Min. 4 – Max. 30°C | Min. 4 – Max. 30°C |
*Capacity may vary depending on incoming water hardness, required flow rate, inlet water pressure, and filter usage (continuous or intermittent).
Dimensions
| SMALL | MEDIUM | LARGE | |
|---|---|---|---|
| Diameter | 87.4 mm | 87.4 mm | 87.4 mm |
| Height without head | 270 mm | 385 mm | 530 mm |
| Height with head | 302 mm | 417 mm | 562 mm |
(Allow a vertical clearance of about 7 cm below the filter for easy replacement).
Activation: It is recommended to run water through the filter at maximum pressure and full flow for at least 5 minutes to purge air and flush the cartridge.
Filter Replacement: Replace after reaching the stated capacity or at least once per year.
Additional parameters
| Category: | Accessories |
|---|---|
| Weight: | 1.52 kg |
Be the first who will post an article to this item!
Be the first who will post an article to this item!